Note The TFTP server included on the software feature pack CD-ROM can be used on a PC running Windows 95. Most TFTP applications provide a setup routine to assist in these configuration tasks. This is the directory in which the Cisco IOS software images are stored (see Step 2 below). Configure the TFTP application to operate as a TFTP server, as opposed to a TFTP client.ī. After the application is installed, a minimal level of configuration must be performed.Ī. Perform these steps prior to installing or upgrading Cisco IOS software:Ī TFTP server or a RCP server application must be installed on a TCP/IP-ready workstation or PC. The information in this document describes Cisco IOS Release 11.2 or later. This appendix explains how to install Cisco IOS software onto "run-from-RAM" Cisco routers using a TFTP server or remote copy protocol (rcp) server application.
Sample Output-Cisco uBR7200 Series RouterĬopying a System Image from One Device to AnotherĬopying from Device to Device Inside the Same Router
Installing or Upgrading Cisco IOS Software Installing or Upgrading Cisco IOS Software Table Of Contents
0 kommentar(er)
